HZ Series

Class I & II, Division 2 Hazardous Location LED Exit and

 

Combination Exit/Emergency Unit





The HZ Series combines energy-saving LED technology and a durable enclosure suitable for hazardous locations. The HZ Series is UL listed for use in Class I, Division 2, Groups A, B, C & D; Class I, Zone 2, Groups IIA, IIB (+ H2) & IIC; and Class II, Division 2, Groups F & G. The HZ Series offers several levels of protection against the elements, including dust, dirt, and water. The HZ Series is constructed of an impact-resistant, fiberglass-reinforced polyester gray housing with stainless steel hardware and clear polycarbonate cover.

Equipped with Intelli-Charge for self-diagnostics, the HZ Series is provided standard with an on-board IR receiver and is pre-programmed for use with our optional hand held test device allowing for remote testing in accordance with all applicable building code requirements. One-minute and 90-minute testing may also be initiated via the push to test switch on the unit.

The exit only HZ Series is offered with a maintenance-free nickel cadmium battery for 90 minutes of emergency operation. The combination HZ Series is offered with a maintenance-free lead calcium battery for 90 minutes of emergency operation. Illumination of the combination HZ Series is accomplished with Class I, Division 2 rated "Z" series lamp heads mounted on the unit. "Z" series lamp heads are available in a variety of wattages. The HZ Series meets the Buy American requirements.


HZ Series - Exit Only Specification Sheet (PDF)

HZ Series - Combination Specification Sheet (PDF)

Intelli-Charge For Exits Specification Sheet (PDF)

HZ Series - AC Exit Only Instruction Sheet (PDF)

HZ Series - Emergency Exit Only Instruction Sheet (PDF)

HZ Series - Combination Instruction Sheet (PDF)





To use the following lamp head photometric files, you must already have software that allows you to open .ies formatted files. They are listed by part number. If you are unfamiliar with our product part numbers, please access the above downloadable specification sheet.

 

Industrial Duty Sealed Beam PAR 36 - Class I Div 2

 

 

ZA - 6V 8W tungsten.ies

ZB - 6V 18W tungsten.ies

ZC - 6V 25W tungsten.ies

ZY - 6V 6W halogen.ies

ZI - 6V 8W halogen.ies

ZJ - 6V 12W halogen.ies



 

 




The free Adobe Reader® allows you to view, navigate, and print PDF files across all major computing platforms.

 


272 West Stag Park Service Road  Burgaw, NC 28425  phone: (910) 259-1000  |  fax: (800) 258-8803
© Copyright 2006-2011 | Chloride Systems is a Philips group brand | All rights reserved

web design by cfwebmasters.com